Half - Automatic Hydraulic Drill ,Milling &Tapiing Machine / cnc lathe machine
Description:
Use PLC control system,stable operation,easy maintenance,mainly
applicable to a variety of copper& iron valve ,fittings,zinc
ally,hardware products, switch combination mode of operation is
simple,product sorting vibrating feeding,stable performance,the
machine integrates automatic clamping,automatic cutting,the car
into the outer circle,tapping ,set of teeth for the integration,a
person can achieve the operation of machine tools,save labor
cost,at the same time,value can be increased 80% more than the
previous hand operation.
1. Machine adopt entirety casting,widen machien botton
part,improved stability
2. Lathe guide widen, lathe carriage thickened,enable to have
higher rigidity
3. Middle carriage lengthen,length and width is 400*180mm
4. Big carriage adopt bronze veneer(optional),reduced the friction
coefficient of the carriage,The creep of the machine in the low
speed state is reduced, abmachined surface,durability is improved,
meanwhile
5. The front and back bearing adopt Angular touch bearing,make it
higher precision and high speed
6. Can install can install three jaw chuck and spring chuck
7. X axis and Z axis adopt the full protection design,prolong
machine using life.
8. Spindle have water proof design, make the machine can be work
well in condition of large flow of coolant cutting
9. Adopt automatic centralized lubrication system
10. Modular circuit design, more stable performance .
11. Guide Super audio quench,hardness above HRC58
Specifications:
| Spindle hole diameter | Ø32mm |
| Tool carrier quantity | 5 (2 vertical knives, 2 cross knife, 1 tapping or drill tail) |
| Maximum machining length | 150mm |
| Machining accuracy | ±0.03mm |
| Spindle speed | 1430r/min |
| Motor power | 2.2kw/3kw/4kw |
| Clamping mode | Hydraulic hollow rotary oil cylinder |
| Clamp type | Three jaw chuck or Spring chuck |
| Machine weight | 750kg |
| cover type | Semi enclosed cover (standard) / closed cover (optional) |
| Machine size | 1500x1500x1050mm |
Work steps:
Put the workpiece into chuck,machine automatic process after
button,stop and brake automatic when prodcution finished
Application:
Mainly use for all kinds of copper(zinc,aluminum)valves,fittings
machining
Competitive Advantage:
1. Three times faster than normal cnc machine,products suit for
less than 1 inch,new workers can operate well on machine also.
2. Simple operation, stable function
