SF-90LY2Z Two Spindle Vertical Rotary Disk Type Drilling & Tapping
Combination Machine For Hardware products
Specification:
1. Use imported PLC for simple operation to achieve 2 spindles
machining synchronously.
2. Use imported dividing disc to locate for equal division and high
precision.
3. Suitable for machining quantity production with big diameter.
4. The hydraulic system is controlled by precise solenoid valve,
which has such merits as convenient pressure and speed adjustment,
uniform dimension for installation, strong interchangeability to
make it operate stably and position correctly.
5. This machine uses Man-machine Interface, with the function of
reporting abnormal states, thus circuit errors will be detected in
time, and Automatic Chip Removal System can be added according to
customers’ needs
Technical Parameters
◆ Max reaming diameter: Φ60mm
◆ Drilling spindle motor: 3KW/4P
◆ Tapping spindle motor: 3KW/6P
◆ Spindle taper: BT40 (7:24-40#)
◆ Max tapping diameter: M50
◆ Hydraulic pressure: 1.5~3.5Mpa
◆ Pipe (brass piece): G1 1/2
The spindle motor may be adjusted appropriately depending on the
actual situations
◆ Cycle time: 8±2s
◆ Net weight: 2200kg
◆ Drilling, tapping spindle travel: 140mm/120mm
◆ Spindle diameter: 110mm
◆ Machine dimension: 1920×1150×2250mm
The exact cycle time is determined by the procedure & material of
work piece
Vises can be install with different kind of clips according to
customer's requirements.
Side handing 3 index work table,can process Hydraulic double-open
vise
two position simultaneously
Equipped with scroll chip remove device and cooling system Electric
system
Equal plate splitter in three portions, suitable dor double-spindle
3 stations worktables
Especially using for sanitaryware( faucet ),auto/motorcycle
accessory,hardware
After-sales
We offer 2 year quality guarantee,and free charges of machine
operate training .
